Fluoropolymer insulated cables

HEW-KABEL (EN)
Products
Fluoropolymer insulated cables

HEW-KABEL primarily uses the 4 materials listed in the following for the insulation and jacketing of lines and cables:

Best chemical resistance as well as very good electrical and mechanical characteristics.

Processed by banding and extrusion.

Material characteristics similar to PTFE.

Processed by the extrusion method.

Provides benefits in the production of cables with large cross sections.

Processed using the extrusion method.

Very good chemical and mechanical characteristics.

Processed using the extrusion method.

In addition to the materials mentioned above, HEW-KABEL has numerous other thermoplastic elastomers, thermoplasts and a wide variety of special materials in its range of products.

We will happily provide you with a tried-and-tested solution and jointly develop a cable design that is optimally adjusted to your specific demands and requirements.

Your challenge. Our cable.

HEW-KABEL primarily uses the 4 materials listed in the following for the insulation and jacketing of lines and cables:

You might also be interested in the following topics.

Expertise

Raw Material

Certificates

PTFE, PFA, FEP and ETFE cable

HEW-KABEL primarily uses the 4 materials listed in the following for the insulation and jacketing of lines and cables:

PTFE: Temperature range: -190 °C to +260 °C

PFA: Temperature range: -190 °C to + 260 °C

FEP: Temperature range: -100 °C to + 205 °C

ETFE: Temperature range: -100 °C to +150 °C

You might also be interested in the following topics.

Expertise

Raw Material

Certificates